在線有毒氣體監測儀 防爆 德國

• 型   號：C7STATOX 501
• 價   格：

在線有毒氣體監測儀 防爆 德國 型號:C7STATOX 501

訂購留言

分享到：

在線有毒氣體監測儀 防爆 德國 型號:C7STATOX 501

庫號：M265498

基本配置：
1.501可燃氣體探頭ExE ARE*20個，0-LEL
2.501 HRC校驗器適配器 1臺
3.501 控制模塊 20個
4.通用報警模塊 1個
5.電源 50W,10組 2個

固定式氣體檢測報警系統，用于氧氣，有毒氣體及可燃氣體
導軌式現代控制器，大大節省了空間，費用和安裝時間。
傳感器探頭加上一臺控制器即可組成一套完整的氣體檢測系統，測量數據可*保存。
安裝簡單，使用方便
控制器電源和普通報警模塊連在導軌控制器上。

傳感器更換簡單可行。

Fixed gas detection system for oxygen, toxic and combustible gases
The DIN – rail mounted modern controller saves space, money and installation time.
在線有毒氣體監測儀 防爆 德國 型號:C7STATOX 501
One safe controller for all gases: Any combination of a sensor head plus a controller is a complete gas detection system. This is what makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum expenditure. 型號:C7STATOX 501

Programs for any gas and measuring range are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button.

Easy to install and easy to use

The controller as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the controller. The Statox 501 controller has three relays for alarm 1 and 2 and system failure （115 / 230 V AC / 2 A）. An analog output for recorder or process control systems is also included.
型號:C7STATOX 501
Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the new 501 controller! Just follow the menu!

If sensor heads are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters.

24 V power supply as well as the signals for the common alarm module are transmitted via bus from one controller to the next. All terminals are easily accessible from the front.

Field proven sensors for reliable gas detection

Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The sensor remote heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display.

Combustible gases can detected with a variety of catalytic beads （pellistors） or infrared technology. The sensor heads are certified and can be connected directly to the controller even if they are to be used in classified areas. The controller can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs.

Easy maintenance saves time and money

Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas.

Accessories

A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a
19”-carrier, ensure an easy professional installation